View ULQ2003D1013TRY_4245363.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ULQ2001 ULQ2003 - ULQ2004
Seven Darlington array
Features

Seven Darlington per package Extended temperature range: -40 to 105 C Output current 500 mA per driver (600 mA peak) Output voltage 50 V Automotive Grade product in SO16 package Integrated suppression diodes for inductive loads Outputs can be paralleled for higher current TTL/CMOS/PMOS/DTL compatible inputs Inputs pinned opposite outputs to simplify layout These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal print-heads and high power buffers. The ULQ2001A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO16) as ULQ2003D1/2004D1. The ULQ2003 is available as Automotive Grade in SO16 package. The commercial part numbers is shown in the Table 1 (order codes). This device is qualified according to the specification AEC-Q100 of the Automotive market, in the temperature range -40 C to 125 C, and the statistical tests PAT, SYL, SBL are performed.
DIP-16 SO16 (Narrow)
Description
The ULQ2001, ULQ2003 and ULQ2004 are high voltage, high current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The versions interface to all common logic families. Table 1. Device summary
Order codes ULQ2001A ULQ2003A ULQ2004A ULQ2003D1013TR ULQ2003D1013TRY
(1)
Part numbers ULQ2001 ULQ2003 ULQ2004 ULQ2003 ULQ2003 ULQ2004
1. Automotive Grade products.
Description General purpose, DTL, TTL, PMOS, CMOS 5 V TTL, CMOS 6-15 V CMOS, PMOS
Packages DIP-16 DIP-16 DIP-16 SO16 in tape and reel SO16 in tape and reel SO16 in tape and reel
ULQ2004D1013TR
August 2008
Rev 5
1/14
www.st.com 14
Contents
ULQ2001 - ULQ2003 - ULQ2004
Contents
1 2 3 4 5 6 7 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
ULQ2001 - ULQ2003 - ULQ2004
Diagram
1
Figure 1.
Diagram
Schematic diagram
ULQ2001 (each driver)
ULQ2003 (each driver)
ULQ2004 (each driver)
3/14
Pin configuration
ULQ2001 - ULQ2003 - ULQ2004
2
Figure 2.
Pin configuration
Pin connections (top view)
4/14
ULQ2001 - ULQ2003 - ULQ2004
Maximum ratings
3
Table 2.
Maximum ratings
Absolute maximum ratings
Parameter Output voltage Input voltage (for ULQ2003A/D1 - 2004A/D1) Continuous collector current Continuous base current Operating ambient temperature range Storage temperature range Junction temperature Value 50 30 500 25 -40 to 105 -55 to 150 150 Unit V V mA mA C C C
Symbol VO VIN IC IB TA TSTG TJ
Table 3.
Symbol RthJA
Thermal data
Parameter Thermal resistance junction-ambient, max. DIP-16 70 SO16 120 Unit C/W
5/14
Electrical characteristics
ULQ2001 - ULQ2003 - ULQ2004
4
Table 4.
Electrical characteristics
Electrical characteristics (TJ = -40 to 105 C for DIP16 unless otherwise specified) (TJ = 25 to 105 C for SO16 unless otherwise specified).
Parameter Test conditions VCE = 50V, (Figure 3) ICEX Output leakage current TJ = 105C, VCE= 50V (Figure 3) TJ = 105C for ULQ2004, VCE= 50V, VI = 1V (Figure 4) IC = 100mA, IB = 250A 0.9 1.1 1.3 0.93 0.35 1 50 65 2.4 2.7 3 V 5 6 7 8 1000 15 0.5 VI to 0.5VO 0.5 VI to 0.5VO VR = 50V TJ = 105C, VR = 50V IF = 350mA 1.7 0.25 0.25 25 (1) 1 (1) 1
(1)
Symbol
Min.
Typ.
Max. 50 100 500 1.1 1.3 1.6 1.35 0.5 1.45
Unit
A
Collector-emitter saturation VCE(SAT) voltage (Figure 5)
IC = 200mA, IB= 350A IC = 350mA, IB= 500A for ULQ2003, VI = 3.85V
V
II(ON)
Input current (Figure 6)
for ULQ2004, VI = 5V for ULQ2004, VI = 12V
mA
II(OFF)
Input current (Figure 7)
TJ = 105C, IC = 500A for ULQ2003 VCE= 2V, IC = 200mA VCE= 2V, IC = 250mA VCE= 2V, IC = 300mA for ULQ2004 VCE= 2V, IC = 125mA VCE= 2V, IC = 200mA VCE= 2V, IC = 275mA VCE= 2V, IC = 350mA for ULQ2001, VCE = 2V, IC = 350mA
A
VI(ON)
Input voltage (Figure 8)
hFE CI tPLH tPHL IR VF
DC forward current gain (Figure 5) Input capacitance Turn-on delay time Turn-off delay time Clamp diode leakage current (Figure 9) Clamp diode forward voltage (Figure 10)
pF s s A
50 100 2 V
1. Guaranteed by design.
6/14
ULQ2001 - ULQ2003 - ULQ2004 Table 5.
Symbol ICEX
Electrical characteristics
Electrical characteristics for ULQ2003D1013TRY (Automotive Grade) (TJ = -40 to 125 C for SO16 unless otherwise specified).
Parameter Output leakage current (Figure 3) Test conditions VCE = 50V IC = 100mA, IB = 250A 0.9 1.1 1.3 0.93 50 65 2.4 2.7 3 15 0.5 VI to 0.5VO 0.5 VI to 0.5VO VR = 50V IF = 350mA 1.7 0.25 0.25 25 1 1 50 2 Min. Typ. Max. 50 1.1 1.3 1.6 1.35 mA A V pF s s A V V Unit A
Collector-emitter saturation VCE(SAT) voltage (Figure 5) II(ON) II(OFF) VI(ON) CI tPLH tPHL IR VF Input current (Figure 6) Input current (Figure 7) Input voltage (Figure 8) Input capacitance Turn-on delay time Turn-off delay time Clamp diode leakage current (Figure 9) Clamp diode forward voltage (Figure 10)
IC = 200mA, IB= 350A IC = 350mA, IB= 500A VI = 3.85V IC = 500A VCE = 2V, IC = 200mA VCE = 2V, IC = 250mA VCE = 2V,IC = 300mA
7/14
Test circuits
ULQ2001 - ULQ2003 - ULQ2004
5
Figure 3.
Test circuits
Output leakage current Figure 4. Output leakage current (for ULN2002 only)
Figure 5.
Collector-emitter saturation voltage Figure 6.
Input current (ON)
Figure 7.
Input current (OFF)
Figure 8.
Input voltage
8/14
ULQ2001 - ULQ2003 - ULQ2004
Test circuits
Figure 9.
Clamp diode leakage current
Figure 10. Clamp diode forward voltage
9/14
Package mechanical data
ULQ2001 - ULQ2003 - ULQ2004
6
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
10/14
ULQ2001 - ULQ2003 - ULQ2004
Package mechanical data
Plastic DIP-16 (0.25) mechanical data
mm. Dim. Min. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 Typ. Max. Min. 0.020 0.030 0.020 0.010 0.787 0.065 Typ. Max. inch.
P001C
11/14
Package mechanical data
ULQ2001 - ULQ2003 - ULQ2004
mm DIM. MIN. A a1 a2 b b1 C c1 D(1) E e e3 F(1) G L M S 3.8 4.60 0.4 9.8 5.8 1.27 8.89 4.0 5.30 1.27 0.62 8 (max.) 0.150 0.181 0.150 0.35 0.19 0.5 45 10 6.2 (typ.) 0.386 0.228 0.1 TYP. MAX. 1.75 0.25 1.6 0.46 0.25 0.014 0.007 0.004 MIN.
inch TYP. MAX. 0.069 0.009 0.063 0.018 0.010 0.020
OUTLINE AND MECHANICAL DATA
0.394 0.244 0.050 0.350 0.157 0.208 0.050 0.024
SO16 (Narrow)
(1) "D" and "F" do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.006inc.)
0016020 D
12/14
ULQ2001 - ULQ2003 - ULQ2004
Revision history
7
Table 6.
Date
Revision history
Document revision history
Revision 2 3 4 5 Order codes updated. Order codes updated. Added new order codes for Automotive grade products see Table 1 on page 1. Modified: Table 4 on page 6 and Table 5 on page 7. Changes
05-Dec-2006 23-May-2007 17-Apr-2008 25-Aug-2008
13/14
ULQ2001 - ULQ2003 - ULQ2004
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14

▲Up To Search▲

Price & Availability of ULQ2003D1013TRY

	To Download ULQ2003D1013TRY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .